- 电压击穿试验仪
- 介电常数
-
电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:高温绝缘电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:石墨电极电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:210-炭块电阻率测试仪
-
121T-高温电阻率测试...
-
多功能极片电阻测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121A-绝缘电阻率测试...
-
点对点对地电组率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:油介质损耗电阻率测试仪
-
121A1-热刺激电流测...
-
落球回弹试验仪,介电击穿强度测定仪:121B-全自动电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:高低温绝缘电阻率测量系统
-
121-体积表面电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 落球回弹试验仪,介电击穿强度测定仪:电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 海绵泡沫材料检测仪器
- 受电弓/碳滑板检测仪器
- 材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
落球回弹试验仪,介电击穿强度测定仪:多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动角测定仪
-
落球回弹试验仪,介电击穿强度测定仪:塑料表观密度测试仪
-
普通磨料堆积密度仪
-
白土堆积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝流动时间测定仪
-
压实密度粉末电阻率仪
-
陶粒砂体积密度测定仪
-
氧化铝松装密度测定仪
-
表面活性剂表观密度仪
-
自由流动堆积密度测定仪
-
超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高电压电流值小电流值检验仪(耐脉冲检验仪)-(确定机设定)
High voltage low current tester (arc resistance tester) - (computer control)
新产名稱称:耐电弧试验机
Product name: electric arc resistance tester
企业产品规格型号:NDH-A
Product model: NDH - A
符合规范标准:GB/T 1411-2002《无水硫酸铜绝缘性产品耐高放低交流电脉冲充放的应力测试》(同等IEC 61621-1997)及ASTM D495等规范的需要设计方案制造技术的,并合乎IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
首要适合超范围及功用:
本做实验的时候机是是以用途于电动机、物品和生活费物品等相关行业的技工用橡胶、光敏不饱和树脂胶和绝缘性电阻性层带漆等绝缘性电阻性层带涂料的耐焊弧耐腐蚀性评估,主应用在固态绝缘性电阻性层带涂料如:橡胶、聚酰亚胺膜、光敏不饱和树脂、黑云母、工业陶瓷、窗户玻璃、绝缘性电阻性层带油、绝缘性电阻性层带漆、瓦楞纸等导电介质的耐焊弧耐腐蚀性考试;
本做科学进行试验的时候机由计算公式机调节开机运行,都可以显现当下科学进行试验壮态及科学进行试验时期,科学进行试验结束了后并存放当下科学进行试验数据显示,并可网页打印.规则工作通知单。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 机器为两边一体化框架,下边为操作步骤软件系统,上半部为试验台箱。
2 本类产品用*新智力设定技术性,实现选定 系统程序(IEC或ASTM)可电脑自动采取应力测试,并在手提电脑端界面显示耐压试验的过程和毕竟。
3 **性能方面好的,抗串扰特性强,考试高精准较高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电孤通断的时间差值:乘以 ±10ms
2 调压器发热量:2kVA
3 特殊疲劳试验额定电压:12.5kV
4 实验设计额定电压误差:±3%
5 直流电抑制定位精度:±10% 交流电测试gps精度:1.5%
6 电级对钢材拉伸试验气压:(0.5±0.05)N
7 探针相关材料:钨棒
8 探针间距:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 使用的室内环境工作温度:(23±2)℃
10 用坏境干湿度:(50±5)%
11 外接电源:220V±5% 50Hz
12 耐压 方案: 标准/美标/10 mA 反复/20 mA 间断性/30 mA累计/40 mA间隔
13 测试软件给出:
| 程序代码段 | 电弧焊接感应电流 mA | 焊弧通断事件s | 各环节段持续保持时刻s | 耐压试验总时光s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 不间断通 | 60 | 240 | |
| 5 | 20 | 反复通 | 60 | 300 | |
| 6 | 30 | 接连通 | 60 | 360 | |
| 7 | 40 | 反复通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 编号 | 名字大全 | 总数量 | 备注名称 |
| 01 | 耐弧光测验仪 | 两台 | |
| 02 | 电极材料模式 | 设计一套 | |
| 03 | 工业网架支座 | 一整套 | |
| 04 | 电源模块缆线 | 套 | |
| 05 | 与地面放** | 一组 | |
| 06 | 直流电压毫安表 | 几台 | |
| 07 | 台式电脑测控电脑软件 | 一项 | |
| 08 | 钢材拉伸试验架 | 一朵 | |
| 09 | 探针的距离原则块 | 2块 | |
| 10 | 立场规则块 | 2块 | |
| 11 | 陶瓷制品片 | 2片 | |
| 12 | 喷墨复印机机 | 1台 | 公司 |
| 13 | 测算机 | 1台 | 国际品牌 |
| 14 | 便用详细操作说明 | 1份 | |
| 15 | 达标证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 新规格型号查询:
NDH-A 耐电弧放电试验检测仪-微机管理
NDH-B 耐焊弧疲劳试验仪-触控屏屏掌握
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!